The Deals are Here: Check Back Often > Flashes and Accessories > Flash Add-ons > Cables & Connectors
Sort By:
Page of 1
Cactus Shutter Cable Cactus Shutter Cable Cactus Shutter Cable
This cable will transform your Cactus V5 Wireless Flash Transceiver into a wireless shutter release device!  A shutter release cable is an ideal device to prevent camera shake when you press the shutter release button. It is a must for night photography or taking photos in B-mode.

Simply connect the coiled shutter cable from your camera’s remote control terminal to the V5 transceiver X-Sync Port, and you can wirelessly control the shutter of your camera. This operation will not interfere with your wireless flash setup using another set of V5 transceivers set on different channels. So you may run both shutter release and wireless flash systems in parallel. All of this is made possible by the V5 Shutter Cable.
This cable will transform your Cactus V5 Wireless Flash Transceiver into a wireless shutter release device!  A shutter release cable is an ideal device to prevent camera shake when you press the shutter release button. It is a must for night photography or taking photos in B-mode.

Simply connect the coiled shutter cable from your camera’s remote control terminal to the V5 transceiver X-Sync Port, and you can wirelessly control the shutter of your camera. This operation will not interfere with your wireless flash setup using another set of V5 transceivers set on different channels. So you may run both shutter release and wireless flash systems in parallel. All of this is made possible by the V5 Shutter Cable.
This cable will transform your Cactus V5 Wireless Flash Transceiver into a wireless shutter release device!  A shutter release cable is an ideal device to prevent camera shake when you press the shutter release button. It is a must for night photography or taking photos in B-mode.

Simply connect the coiled shutter cable from your camera’s remote control terminal to the V5 transceiver X-Sync Port, and you can wirelessly control the shutter of your camera. This operation will not interfere with your wireless flash setup using another set of V5 transceivers set on different channels. So you may run both shutter release and wireless flash systems in parallel. All of this is made possible by the V5 Shutter Cable.
Cactus Shutter Cable Cactus Shutter Cable Cactus Shutter Cable
This cable will transform your Cactus V5 Wireless Flash Transceiver into a wireless shutter release device!  A shutter release cable is an ideal device to prevent camera shake when you press the shutter release button. It is a must for night photography or taking photos in B-mode.

Simply connect the coiled shutter cable from your camera’s remote control terminal to the V5 transceiver X-Sync Port, and you can wirelessly control the shutter of your camera. This operation will not interfere with your wireless flash setup using another set of V5 transceivers set on different channels. So you may run both shutter release and wireless flash systems in parallel. All of this is made possible by the V5 Shutter Cable.
This cable will transform your Cactus V5 Wireless Flash Transceiver into a wireless shutter release device!  A shutter release cable is an ideal device to prevent camera shake when you press the shutter release button. It is a must for night photography or taking photos in B-mode.

Simply connect the coiled shutter cable from your camera’s remote control terminal to the V5 transceiver X-Sync Port, and you can wirelessly control the shutter of your camera. This operation will not interfere with your wireless flash setup using another set of V5 transceivers set on different channels. So you may run both shutter release and wireless flash systems in parallel. All of this is made possible by the V5 Shutter Cable.
This cable will transform your Cactus V5 Wireless Flash Transceiver into a wireless shutter release device!  A shutter release cable is an ideal device to prevent camera shake when you press the shutter release button. It is a must for night photography or taking photos in B-mode.

Simply connect the coiled shutter cable from your camera’s remote control terminal to the V5 transceiver X-Sync Port, and you can wirelessly control the shutter of your camera. This operation will not interfere with your wireless flash setup using another set of V5 transceivers set on different channels. So you may run both shutter release and wireless flash systems in parallel. All of this is made possible by the V5 Shutter Cable.
PW-DC-N10 Cable iTTL Cord
The PW-DC-N10 Nikon Power Cable is for use with the miniTT1, Plus III, or the Multimax III Radios.  This new power cable offers greater flexibility for photographers working with any Nikon DSLR Camera equipped with a Nikon 10 pin remote terminal. This Cord allows you to take your Flash off the hotshoe and either hold or place your flash on a bracket and still keep everything fully automatic while improving your lighting and reducing any chance of Red Eye or unwanted shadows in your pictures.
This TTL off camera cable is coiled allowing for approximately 2 feet of extended reach.  This cable allows you to take your flash off camera and still be totally dedicated to your camera.
eTTL Cord PocketWizard Plus X PocketWizard Plus X
This Cord allows you to take your Flash off the hotshoe and either hold or place your flash on a bracket and still keep everything fully automatic while improving your lighting and reducing any chance of Red Eye or unwanted shadows in your pictures.
The PlusX is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System and best of all it is compatible with all Standard Channel-capable PocketWizard transmitters and receivers so it offers the most flexability.  The PlusX features a tri-color LED status indicator that serves two functions.  When the PlusX sends or receives a triggering signal, the LED will glow red.  During normal operation, the indicator will blink a single green blink meaning it is operating normally and the battery life is above 50%.  It will blink a double amber blink when the battery is below 50% but above 25% and it will blink three red blinks when the battery life is below 25% and it’s crucial to replace the batteries. The PlusX is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System and best of all it is compatible with all Standard Channel-capable PocketWizard transmitters and receivers so it offers the most flexability.  The PlusX features a tri-color LED status indicator that serves two functions.  When the PlusX sends or receives a triggering signal, the LED will glow red.  During normal operation, the indicator will blink a single green blink meaning it is operating normally and the battery life is above 50%.  It will blink a double amber blink when the battery is below 50% but above 25% and it will blink three red blinks when the battery life is below 25% and it’s crucial to replace the batteries.